Precise alignment through image capture (camera)
The 3D printed housing for the LightBurn 5MP camera is inspired by an original design by Neil Rosenberg.
The 3D model provided by Lightburn is a better fit for all of the smaller cameras we sell and includes a small inner lip to keep the camera from slipping. The holder is attached to the inside of the lid with double-sided adhesive tape. The camera angle can be easily adjusted by loosening the knobs on either side of the bracket and the front panel is held in place by tension brackets.
The bracket contains the two screws and hex nuts required to adjust the angle and a pair of VHB pads for mounting. The units are delivered assembled.
If you'd like to print your own (for personal use) you can download the STL files here.
(Find Neil's original design here: https://www.thingiverse.com/thing:3891092)
Documentation on setting up and using the camera can be found here (English):
https://github.com/LightBurnSoftware/Documentation/blob/master/Using_a_Camera.md#using-a-camera-with-lightburn
| Model No. | 5MP/8MP |
| Model Size | 92mm × 22mm × 40mm / 92mm x22mm x 70mm |
| Temperature (Operation) | -20°C to 70°C |
| Temperature (Stable Image) | 0°C to 50°C |
| Assembly technique | SMT (ROSH) |
| Focus | Manual |
| Object distance | 30CM-infinity |
| Resolution | 600LW/PH (Center) |
| Interface | USB 2.0 |
| Power | USB bus power |
| Power consumption | 1200 mW |
| Package | Anti-electrostatic tray |
| Operating system request | Windows 11/10, Windows 2000, Windows XP, Windows 7, Linux, Mac |
| Certifications | FCC and CE |
| Maximum resolution | 5Mp/8Mp |
| Sensitivity | 600mv /(lux-sec) |
| Pixel Size | 1.4µm x1.4µm |
| S/N Ratio | 36db |
| Dynamic Range | 68db |
| Package | CSP,Bare Die |
| Lens Type | / |
| Lens Construction | 3G2P+IR |
| F/No | 2.8 |
| EFL | 1.66mm |
| BFL(Optical) | 2.11mm |
| FOV | 160° |
| TV Distortion | <8.5% |
| Relative Illumination (Sensor) | 70% |
| R Filter | 650 ± 10nm |
| DSP Type | HBV5640 |
| AGC/AEC/Whiter balance | Auto |
| Output Formats | USB suspend out |
| Fixed Pattern Noise | < 0.03% of V PEAK-TO-PEAK |
| Package | LQFN-40pin |
Package Included:
1 x Wide Angle Fish Eyes 5MP/8MP USB2.0 Camera Module
1 x USB Cable 0.5m
